Tool pack of some of our most popular modern flintknapping tools in one cost effective bundle. Features two sizes of copper bopper billets and supporting supplies, good for small to large spalls. The copper bopper billet design features a lead core that provides a comfortable weight forward strike and soft impact.

Small billet good for finish work, shaping, and small thinning flakes. This 7/8 inch billet is perfect for fine tuning the profile of a point or blade. The copper bopper billet design features a lead core that provides a comfortable weight forward strike and soft impact.

A great all around copper bopper billet, not too big for finish work, not too small to produce a decent thinning flake. This 1 inch billet is the most used tool for our own small to medium points and blades. The copper bopper billet design features a lead core that provides a comfortable weight forward strike and soft impact.

The large, 1 1/4 inch copper bopper percussion billet is the ultimate thinning tool for medium to large stonework. Our most popular billet for thinning 3-6" spalls, the copper bopper billet design features a lead core that provides a comfortable weight forward strike and soft impact.

Solid 99.9% virgin copper percussion billet for spalling and bi-facing large material. Particularly well suited for reduction of raw blocks and processing dense material that would damage softer billet types. 1-3/4" and 1-1/2" width available with a light bevel on one end. Approx 5-3/4" long (+/- 1/8" due to machining). These are sold individually.

Solid 99.9% virgin copper domed billets for percussion flaking. Five sizes available ranging in width from 1-1/4" down to 5/8". All sizes are approx 5" long (+/- 1/8" due to machining). Particularly well suited for reduction of dense material that would damage softer billet types. These will handle abuse and outlast any other type of billet. Sold Individually.

Solid 99.9% virgin copper rod for use as flakers, punches, and/or micro percussion billets. We have rounded/sharpened the ends of each of the three sizes available. The 1/2" size can be used for indirect and light finishing percussion flaking and the smaller sizes are great for punch and pressure flaking work. All sizes are approx 5" long (+/- 1/8" due to machining).  Sold Individually.

Modern wood pressure flaker with epoxied copper tip. Good for detail, preform flaking, edge re-touch, and notching work on stone points and tools. Sold individually.

Professional grade pressure flaker with durable plastic handle featuring two set screws locking in a hardened copper nail. Allen key included for quick adjustments and nail replacement.

Professional grade durable 20 inch delrin Ishi Stick pressure flaker featuring two set screws locking in a hardened copper nail. Allen key included for quick adjustments and nail replacement. Available in widths of 3/4" (for a semi flexible shaft) and 7/8" (for larger hands & less flex). Sold Individually.

Sold in packs of 4, these hardened copper nails have had the flat bases pre-clipped and are ready to be installed in your delrin hand pressure flaker or Ishi stick. Approx 3.75 to 4 inch long, 20d size.

Thick and durable large rubber leg pad helps prevent damage to your clothing and leg/knee during percussion knapping and provides support when pressure flaking.

Medium size, thick and durable rubber leg pad helps prevent damage to your clothing and leg/knee during percussion knapping and provides support when pressure flaking.

Heavy duty rubber hand pad featuring a groove to allow unobstructed flake travel when pressure flaking.

Modern grinding stone used for proper platform preparation. This abrader stick is of correct courseness to prepare most stone platforms for percussion and pressure techniques.

Flint knapping tool kit featuring our popular medium copper bopper billet and supporting tools. The copper bopper billet design features a lead core that provides a comfortable weight forward strike and soft impact. Other supplies included: abrader stone, copper tipped wood pressure flaker, leather hand pad, and basic instructions.

Heavy duty 2 lb carbon steel spalling hammer good for reducing large raw blocks of material into spalls. Great size for rock hunting in the field. Not for brittle materials such as obsidian, or delicate fine reduction. Sold Individually.

Heavy duty 3 lb carbon steel spalling hammer good for reducing large raw blocks of material into spalls. Great size for rock hunting in the field. Not for brittle materials such as obsidian, or delicate fine reduction. Sold Individually.

Heavy duty 2 lb soft brass spalling hammer good for reducing large raw blocks of brittle material like glass, dacite, and obsidian into spalls. Not for delicate fine reduction. Sold Individually

The steel mini spalling/cleaning hammer is good for reduction of smaller raw blocks of rough material, knocking corners off of small raw nodules to create platforms, and cleaning rough material to better prepare spalls for standard billet percussion. Not for delicate fine reduction. Sold Individually.